Saturday, August 11, 2012

FO: The Iron-On Agenda Border-Print Skirt

Remember the co-blog project that I was doing with Gail? We did it. And look how cute we are!



I ended up doing a self-drafted pleated skirt. All my other skirts are straight or A-line, so I wanted a little diversity.

It's lined, so I can wear it year round. (Preferably on non-windy days. You should see the pics that got deleted from our photo shoot! Except, no you shouldn't.)

Navy Bemberg from Vogue Fabrics' warehouse sale

The waistband is a basic, straight, unlined band with a tab for a hook and eye. It has a side zip, for which I used an olive invisible zipper.



Each side of the front and back has 4 soft pleats, for a total of 16.



To reduce bulk, I left about 3" without pleats at each of the sides, the center front, and center back.



The hem is a simple baby hem. This worked well for two reasons: I was trying to get done in time to meet up with Gail and Niecey-poo (made it with 30 minutes to spare!), and the fabric is so lightweight that I was worried catch-stitching would be obvious.


I initially left the lining unhemmed out of concern for length and general laziness to get that posh-rustic Anthropologie look. (Hat tip to Gail for that excellent excuse.) But I will probably end up hemming it, because the lining comes down below the skirt when I sit.

So there you have it! I spent about 2 hours figuring out the math for this thing, so I'm going to do a post about that in the next few days. But for now, go check out Gail's post about her gorgeous blouse!

5 comments:

  1. Prepare to get copied ;-)

    I'm surprised that the lining shows when you sit - it seemed like it was significantly shorter than the outer fabric. Ah, the mysteries of sewing!

    ReplyDelete
    Replies
    1. I think I know why. The pleats on the lining are deeper than on the skirt. (I didn't completely redo the lining after my failed attempt.)

      Delete
    2. Ah - so the lining is actually fuller than the skirt.

      Delete